6
A
utomatic Selection of Light Color
Press the
light button to activate
automatic selection of the light color.
During automatic operation 5 LED's
illuminate for an operating time of 5
minutes.
When the light color selection is switched
to automatic the color sequence is red-
red/yellow-yellow-yellow/green-green-
green/blue-blue-blue/red. In the basic
mode the individual colors are held for 5
minutes and the mixed colors for 10
seconds (see "Default Parameters")
The holding time can be set within the
range of 1 min. and 10 min. The row of
LED's starts to flash when the
-
button is pressed.
The time can be changed with the
and
buttons.
Pressing the
-button again confirms
the value set and the corresponding
number of LED's illuminates in the row
of LED's (5 minutes = 5 LED's, 10
minutes = 10 LED's, etc.)
The holding time for mixed colors can
be set to 10 seconds (default setting) or
to the operating time for the individual
colors:
Press the
- and
-buttons
simultaneously and hold for 2 seconds
until the row of LED's flashes
momentarily. Reset by pressing again.
The parameters set last remain set as
long as the control is not separated from
the line power.
S
tart-up
After checking all connections again,
connect the unit to the line power by
switching on the circuit breakers and/or
main switch. The green LED above the
-symbol signals that the unit is
ready for operation.
Switching on the unit for the first
time
Pressing the Start/Stop button
, for
the first time after connecting the power
supply switches the unit to its ready
mode. The red LED on the colored light
unit and the red LED on the control unit
illuminate.
Default Parameters
O
Manual colored light selection
O
Operating time for individual colors in
automatic mode: 5 min.
O
Operating time for mixed colors in
automatic mode: 10 sec.
Manual Selection of Light Color
It is possible to select between individu-
al colors and mixed colors with the
and
buttons.
english
