background image

14

GB

Guarantee

The guarantee is taken over according to
the legal regulations at present.

Manufacturer’s warrenty

- The period of warrenty starts from the

date of purchase and lasts up to 2 years
for commercial use and 3 years  for pri-
vate use.

- Always include the completed warrenty

certificate when returning equipment.

- The warrenty expires for appliances

which have been modified without
manufacturer’s explicit agreement.

- Damages caused by incorrect operation

or handling through non-authorized
persons are not covered under the
terms of warranty.

- In the event of a claim, please indicate

the serial number as well as the article
code number and type name with ex-
pressive description of the fault.

- This warrenty covers damaged parts but

no defects due to wear and tear.

In case of complaint please return the
equipment in its original packaging or
other suitable packaging (caution: danger
of transport damage) to our service
department.

Always include the completed warrenty
certificate when returning equipment.

Possible shipping costs arising from the
transport to and from point of repair cannot
be borne by us.
Outside of Germany please contact your
specialist dealer in case of warranty claims.
Direct warranty processing with our service
department is in this case not possible.

Equipment start-up date:

Stamp and signature of the authorized
electrician:

Service Address:

EOS-Werke Günther GmbH

Adolf-Weiß-Str. 43

35759 Driedorf-Germany

tel    +49 (0)2775 82-240

fax   +49 (0)2775 82-455

[email protected]

www.eos-werke.de

Содержание ECON A2















Отзывы: