EOS Bi-O Invisio, Инструкция по сборке и эксплуатации

Страница: 24 / 40

24
EN
Fill via the fixed water connec-
tion FWA 01
Mount the FWA 01 at the height stated in fig. 5
in or outside the cabin. Connect the FWA to the
vaporizer using the enclosed flex hose. To this
end, remove the lower hose connector and in-
sert a double nipple 1/2". Connect the flex hose
of the FWA to this nipple.
Always check for leaks before com-
missioning.
Please note!
Check the connections for leaks at
regular intervals.
100 mm
Fig. 5
Fixed water connection
FWA 01
ATTENTION!
So-called plasticizers are able to modify the
water surface tension in the steam generator
water tank. This can lead to strong foaming, so
that the hot water may come out of the steam
outlet. Furthermore this can lead to incorrect
water level detection and overheating errors.
Please ensure that the water supply is clear of
plasticizers or similar substances.
Plasticizers and similar substance are, among
others, oils (e.g. essences), detergents, lubricants
or specific chemicals contained in plastics like
PVC. It must be ensures that the water supply line
does not use any materials which may contain
plasticizers.
The filling funnel is not required, if the fixed wa-
ter connection is used for filling. The FWA is now
connected to the connector for the filling funnel.
Please note that this connection is vented during
operation:
Important Information:
The rules of the EN 1717 as well as the DIN 1988
part 4 are to respect.
It is important to prevent that the water can‘t
flow back into the drinking watermanagement-
system. Pipe or system separator are suitable
for example.
Please ask your drinking water supplier or in
a authorized sanitary specialized trade if ne-
cessary.