Eonon E1095, Руководство пользователя, Страница: 6 / 16

4 25
7. Following the diagrammatic representation to insert the key
to product to fit properly. Press the key at the side of product
to pull out the product.
DIN BACKWORD INSTALLATION
Disassemble framework
8. Framework
9. Insert the loosing insert pin into the buttom hole of
framework and full it out to disassemble framework. (When
install framewoek, pls level the flute)
Fix the product on the installation rack of wireless equipment.
10. Choose screw hold on produxt which is the same as that
of installation rack, then screw on 2pcs of screw at the side of
products. Choose proper screw according to the screw hold
of the installation rack.
11. Screw
12. Factory wireless equipment installation rack.
13. Fender or bracket.
PBC (MENU) PLAY
In (VCD) mode, press this button then play the PBC and display will show whole menu in
disc, work with number button to choose song. when you are playing either song of the
PBC, and you want to stop to select another song, press the button to turn off.
Note:
1. This function can be worked by the remote control.
2. PBC is suitable for the SVCD and VCD 2.0 disc.
3. In PBC mode, you can not press number button only to choose song.
VCD program playing
In VCD mode, you can set playing sequence of songs by program play function. The
program playing operation steps are as follows:
In VCD mode, press ST/PROG button, display will show
Input the songs which you want to programmed by the number buttons on remote control.
For example: Program the first song, unput your desired song, for example, the sourth
song, and press number button 4 on the remote control. Program the second song, press
button move the cursor to 2_ _ _ _ , input your desired song, for
,
example, the eighth song, press number button 8 on the remote control. Press button
to program play.
Back to the normal mode, press the ST/PROG button, then press
button.
Note: This function can only be worked by the remote contrl.
PLAY
PROG
PROG