3
26
INSTALLATION
NOTE
:
- Before install the unit permanently, pls connect it to your
car temporary to see whether your unit and system can
operate properly lor not. To ensure connect installation,
pls use sttached accessory of this unit. If use others, it
may lead to damage.
- Pls drill or change is needed, pls contace your dealer.
- Pls do not install the unit at the place which it will
influence drive or hurt passenger. Do not install the unit
under high temperature, or else the laser may be damager.
- If the installation angle is larger than 60 degrees, unit
may not reach best performance.(A1)
-To ensure cool enough, pls leave enough place and
bundle and wires.
DIN FRONT BACK INSTALLATION
The unit can be installed at FRONT(traditional DIN front
installation)and BACK(DIN back installation,using two side
screw hole of down-lead).Pls refer to the following
diagramming:
DIN FRONT INSTALLATION
Use rubber pad to intall (A2):
1. Fender
2. Fixer
After insert fixer into fender, choose proper slice to bend
according to the thickness of fender material. (Use silde
at the top and button if possible to fix, pls bend slice to 90
degree angle for saftey reason.)
3. Rubber pad
4. Srew
Disassemble this product. (A3.A4)
5. Framework
6. Insert the loosing insert pin into the buttom hole of
framework and pull it out to disassenble framework.
(When install framework, pls level the flute.)
Operation of RDS function
In Radio mode,press the number button 7 once on the remote to change to TA mode,press
8 to change to AF mode,and press 9 to change to PTY mode.
In other modes,press longer the number button 7 to change to TA mode,and press longer
the 8 to change to AF mode:
Note:this function can only be access by remote control.
Operation of AF
In AF mode,press the number button 8 on remote control once,the unit will scan to search
the RDS radio station automatically,and the"AF" on the LCD display twinkling all the
time.
When the unit searched one RDS radio station,the LCD display will show ”TP” on it.
Press the number button 8 again,the “AF” on the LCD display will disappear. The unit will
in normal radio mode.
The default of the system is “AF ON”.
Operation of TA
In TA
mode,press the number button 7 on remote control once,
the TA mode is switch on,
and LCD display will show “TA” on it. Then the unit will transfer the traffic radio station
information, it make the EON system scan and search the traffic radio station, the LCD
display will show”TP” when searched the radio station.Press the unmber button 7 again
to switch off the TA mode,
and the
"
TA
"
on the LCD display disappear at the same time.
In any mode,
the traffic radio station is in priority any other radio stations.
Operation of PTY
When searched the PTY programs,
press the button PTY all the time,
and at the same
time to use VOL+/- buttons to choose the program.The different kinds PTY programs are
as following:
NEWS
SPORT
CULTURE
POP M
LIGHT M
WEATHER
SOCIAL
TRAVEL
COUNTRY
FOLK M
AFFAIRS
EDUCATEE
SCIENCE
ROCK M
CLASSICS
FINANCE
RELIGION
LEISURE
NATION M
DOCUMENT
INFO
DRAMA
VARIED
EASY M
OTHER M
CHILDREN
PHONE IN
JAZZ
OLDIES
TEST
ALARM
Содержание E1095
Страница 1: ......