6
2
.
Panel button control instruction
1.SRC(Power button/audio mode switching button)
Press this button to power on.
Press it shorty to switch audio source mode.
At AUX IN
mode,press it longer to power off.
2.MUTE/TFT ON/OFF BUTTON
Press this button shortly to turn off volume output,press again to resume former volume
level.
Press this button longer to turn on/off TFT LCD display.
3.OPEN BUTTON
In other audio source,press this button to slide up or down display.At that time,load disk,
unit will play it and close the display.If there is a disk inside,unit will auto eject disk.
4.VOL- BUTTON
Press this button to reduce the volume.
5.VOL+ BUTTON
Press this button to increase the volume.
6.UP BUTTON
Short press this button to make the monitor glide up steply.
Long press this button to make the monitor glide up to the toppest position.
7.DN BUTTON
Short press this button to make the monitor glide down steply.
Long press this button to make the monitor glide down to the lowest position.
8.AUX IN audio input jack)
External connected audio input.
9.MINI USB PORT
The audio and wiedo documents can be red by mini USB port which is with standard
high speed USB port.
10.Release button
Press this button can take off the control panel.
11.REMOTE CONTROL RECEIVER
It can receive infrared massage of remote control.
12.SD slot
Using hight speed 2.0 port which can read many big capacity MP3.MP4 format file.
43
Operations and Settings for the Bluetooth Function
1. Features of the Bluetooth function
1) You can use the function buttons on the unit to receive a call or dial a phone number.
2) You can directly use the hand-free microphone to talk on the phone.
3) You can use the build-in volume control switch to adjust the volume at will.
4) You can switch between the Bluetooth hand-free mode and the cell phone mode.
5) You can use your voice to dial a new number (valid only for cell phones with voice
dialing function).
6) With the Bluetooth function, you can use the Bluetooth microphone in the car to talk
with your folks and friends without having to hold your cell phone, so that your hands
are dedicated for driving, which is safer and law-observing. In the mean time, magnetic
radiation from the cell phone is avoided.
2. Bluetooth match conditions
You can shortly touch the Bluetooth function key
under the main menu to directly
access the Blueetooth interface.
With a cell phone that supports the function of Blueetooth wireless connection, you can
establish a connection between your cell phone and the automobile-loaded unit under the
Bluetooth mode to achieve date exchange and synchronization.
3. Matching and connections between the cell phone and the Bluetooth of the unit
Set your cell phone to the Bluetooth mode, and use the cell phone to search equipments.
After the Bluetooth equipment of the unit is searched, the cell phone will ask you for the
Bluetooth password. Press the unit matching setup button , and enter the Bluetooth
password (0000) and confirm it, and then the cell phone will ask you whether you
authorize
the connection with this equipment or not. Please select “YES”, and the cell phone will be
automatically connected with the said Bluetooth equipment within 30 seconds. “OK LINK”
will be displayed on the Bluetooth interface to show that a connection between the cell
phone and the Bluetooth device has been successfully established. Under and mode
(radio, TV, DVD, etc.), if there is an incoming call to your cell phone which has been
stably
connected to the Bluetooth device of the unit, the unit will switch from other mode to the
Bluetooth mode after the cell phone rings for about 10 seconds. Current mode will be
automatically restored after hang-up.
