3
EN
IMPORTANT SAFETY
INSTRUCTIONS
Read these instructions carefully and retain them for future use.
If this product is passed to a third party, these instructions must
be included.
When using electrical devices, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and/or injury to persons
including the following:
WARNING
The terminals marked with symbol carry dangerous
voltages and the external wiring connected to these terminals require
installation by an instructed person or the use of ready-made leads or
cords.
WARNING
To prevent injury, this product must be securely
attached to the floor/wall in accordance with the installation instructions.
• Connect the power plug to a readily operable mains socket outlet
so that in case of an emergency the product can be unplugged
immediately. Use the power plug as the disconnection device.
• If the supply cord is damaged, it must be replaced by a special cord
or assembly available from the manufacturer or its service agent.
• No naked flame sources, such as lighted candles, should be placed
on the product.
• The product shall not be exposed to dripping or splashing water.
No objects filled with liquids, such as vases, shall be placed on the
product.
• The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, table-cloths, curtains etc.
• Unplug the product during lightning storms or when unused for long
periods of time.
• To reduce the risk of fire or electric shock, do not expose the product
to rain or moisture.
• Before installing or operating the product refer to the information on
rear enclosure for electrical and safety information.
• Do not install the product in a confined or built-in spaces such as
a book case or similar unit. Maintain good ventilation around the
product.
• To reduce the risk of electric shock, do not perform any servicing
other than that contained in the user manual unless you are qualified
to do so.
