7
ASSEMBLY
1.
Handlebars:
When your eBike is first shipped the handlebars will not
be attached. There are two steps to assemble this. First, remove the
handlebar stem from the collapsed position. To do this, simply
straighten the handlebar frame until it is perpendicular to the ground.
When this is complete, use the metal clasp on the side of the frame
to lock the collapsible joint in place and
INSERT THE SAFTEY LOCK.
If
done properly, there should be no movement of the l o c k o r
handlebars or safety latch.
Next, insert the loose handlebars into the handlebar stem with the
brakes facing outward and push down. You may raise and lower the
handlebars as you wish until you find a height comfortable for riding.
When this is complete, simply pull the locking mechanism displayed
below backward to secure the handlebars in place. Please ensure the
lock is snug and there is no movement.
2.
Frame:
In addition, the middle of the bike will also be in the folded
position. To assemble this, (see next page) simply unfold the bike
until the frame is perfectly straight and use the metal clasp on the
frame to lock the joint together.
DO NOT FORGET TO INSERT THE
SAFTEY LOCK.
There should be no movement at the collapse point if
done properly.
