background image

product warranty for Australia     

Effective 27 September 2021

Enware Australia Pty Limited (ACN 003 988 314)  
(“we” or “us”) warrants that this product (also referred 
to as “our goods”) will be free from all defects in 
materials and workmanship for 12 months* from the 
date of purchase. Our liability under this warranty 
is limited at our option to the repair or replacement 
of the defective product or part, the cost of repair 
of the defective product or part or the supply of an 
equivalent product or part, in each case if we are 
satisfied the loss or damage was due to a defect in 
the materials or workmanship of the product or part. 
All products must be installed in accordance with the 
manufacturer’s instructions, the Plumbing Code of 
Australia (PCA), and AS/NZS3500 including any other 
applicable regulatory requirements.

exceptions

This warranty does not apply in respect of any 
damage or loss due to or arising from:
a) Failure by you or any other person to follow 
any instructions for use (including instructions 
and directions relating to the handling, storage, 
installation, fitting, connection, adjustment or repair of 
the product) published or provided by us;
b) Failure by you or any other person responsible for 
the fitting, installation or other work on the product to 
follow or conform to applicable laws, standards and 
codes (including the AS/NZ 3500 set of Standards, 
all applicable State and Territory Plumbing Codes, 
the Plumbing Code of Australia and directions and 
requirements of local and other statutory authorities); 
or
c) Any act or circumstance beyond our control 
including faulty installation or connection, accident, 
abnormal use, acts of God, damage to buildings, 
other structures or infrastructure and loss or damage 
during product transit or transportation.

making a claim

To make a claim under this warranty you must  
notify us in writing within 7 days of any alleged defect 
in the product coming to your attention, provide us 
with proof of your purchase of the product and have 
completed the Online Product Service and Warranty 
Form available on website: 
www.enware.com.au/warranty-service-form
All notifications and accompanying forms must be 
sent to us marked for the attention of the Enware 
Australia Pty Limited, 9 Endeavour Road, Caringbah 
NSW 2229. We can also be contacted by telephone 
(1300 369 273) or by email ([email protected]). 
Your costs in making a claim under this warranty, 
including all freight, collection and delivery costs, are 
to be borne and paid by you. We also reserve the 
right at our cost to inspect any alleged defect in the 
product wherever it is located or installed or on our 
premises.
 

* Ifo Toilet - Ceramics: 10 Years warranted against material 
and manufacturing defects (parts only)  |  Flush Valves, WC 
seats, Fittings and Accessories - 2 Years warranted against 
material and manufacturing defects (parts only)  |  Pressalit 
Toilet Seats (Non Care) - 10 years warranted against 
material and manufacturing defects (parts only)   
|  Accessories & Spare Parts - 2 Years warranted against 
material and manufacturing defects (parts only) 
For more on warranty, see www.enware.com.au/warranty

other conditions

Except as provided or referred to in this document, 
we accept no other or further liability for any 
damages or loss (including indirect, consequential 
or economic loss) and whether arising in contract, 
tort or otherwise. Any benefits available to you under 
this warranty are in addition to any non-excludable 
rights or remedies you may have under applicable 
legislation, including as a “consumer” under the 
Australian Consumer Law. To that extent you need to 
be aware that: our goods come with guarantees that 
cannot be excluded under the Australian Consumer 
Law. You are entitled to a replacement or refund for 
a major failure and for compensation for any other 
reasonably foreseeable loss or damage. You are also 
entitled to have the goods repaired or replaced if the 
goods fail to be of acceptable quality and the failure 
does not amount to a major failure.

ADDRESS:

 

9 Endeavour Rd Caringbah NSW 2229 Australia 

POSTAL ADDRESS

P.O. Box 2545, Taren Point NSW 2229 Australia

1300 369 273 (AUS)   WWW.ENWARE.COM.AU   INFO

@

ENWARE.COM.AU

ABN 23 003 988 314

Содержание Ifo Sign Junior Toilet-S Trap













Отзывы: