User Manual
Gobi-640-17µm and Gobi-384-25µm-GigE, CL, CXP Camera
4.2. Power Interface
The power cable (ASY-001268) must be connected to the backside of the camera (see
for its location). For a Gobi-GigE, the power cable does not need to be connected
to the camera in case Power over Ethernet (PoE) is foreseen.
shows schematically the pin location of the power connector on the camera
lists the connector pins overview.
Pin
Signal
1
+ 12V
2
+ 12V
3
Gnd
4
Gnd
Figure 4-1 Camera power connector
Table 4-2 Camera power connector 12V
DC
Pin
Signal
1
+ 12V
2
+ 12V
3
Gnd
4
Gnd
Figure 4-2 Cable connector
Table 4-3 Cable connector 12V
DC
For the power cable (ASY-001268) the connector pins overview is shown in
shows schematically the pin location of the cable connector (Hirose
HR10-7P-
4P(73))
.
4 1
3 2
www.envision.co.kr
•Supporting your Vision
(주)앤비젼
서울시 금천구 가산동 550-1 IT캐슬 1동 603호 (153-768)
Tel.
02. 2624. 5503
Fax.
02. 2082. 6427
e-mail.