Wiring the fan correctly...
Due to our policy of continuous innovation and improvement EnviroVent reserves the right to
alter products specification and appearance without notice.
You are about to install a product that is designed to outlast the life-cycle of the building. Once installed
the unit will operate continuously for 5 years and beyond without a major service. Please therefore ensure
that this product is treated with care and installed properly i.e. for the life of the building. If the unit is
mishandled you might break it! This invalidates the warranty.
And remember, if you have any problems please call our dedicated Technical Team. We are always
pleased to help and in an emergency will come out to site quickly, completely free of charge.
2
3
1
The connection into the fan MUST be a flexible
cable and NOT solid core twin and earth, if the fan
is mishandled or a solid core twin and earth cable
is forced into the terminals you WILL break it, this
will invalidate the warranty.
If it is necessary to use twin and earth you must
not take it into the fan. Use a terminal block to
make the connection between the flexible cable
supplied with the fan and your solid core twin
and earth cable. 12V D.C - Red wire on fan must
connect to red wire on SELV unit.
Place the cables inside the void in the back of the
back carcass next to the cable gland and secure
the fan to the wall securely.
IMPORTANT: The black grommets and sticky pad
provided must be fitted in this unit. Not using these
items will jeopardise both the IP rating and the
warranty.
