1
MEV 160 & MEV 300
0345 27 27 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
WITH YOUR UNIT, CALL US ON:
SAFETY
Read and understand these instructions before beginning installation. The unit should be
installed by a competent person.
LOCATION
Check there is space for the unit in your chosen location including room for access and future
servicing of the unit. The unit must not affect the operation of open-flue appliances. Consider
the external vent locations in relation to open-flues from appliances e.g. boilers. The unit should
not be installed in wet rooms.
USERS
This unit is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge, unless they have been given
supervision and usage instruction by a person responsible for their safety. Children should be
supervised to ensure they do not play with the unit. Cleaning and user maintenance must not
be performed by children.
ELECTRICAL CONNECTION
All wiring must comply with Building Regulations and the current IET Wiring Regulations
(BS7671 in the UK) or equivalent standards for other countries. The final installation should be
examined and tested by a qualified electrician. The unit requires a continuous electrical power
supply. Connection to the fixed wiring must be made outside the unit in a suitable location.
The unit must be able to be disconnected from the mains supply after installation. The unit
must be earthed and a double pole switch with minimum contact separation of 3.0mm must
be used to provide isolation for the unit (see the wiring diagram on page 2). The power supply
cable running into the unit must remain the supplied flexible cable (not a solid core twin and
earth cable). If the power supply cable becomes damaged, it must be replaced by EnviroVent,
an authorised service agent for your region/country, or a similarly qualified person in order to
avoid a hazard. Do not remove or tamper with any electronic components inside the product.
