7
NOTE: Personal Protective Equipment, Level C or D, as defined in OSHA 29 CFR
1910.120, shall be worn as a minimum while operating or cleaning the Spill Buddy unit.
A suitable container should be used to contain product.
Chapter 1- System Operation
STANDARD EQUIPMENT LIST:
Spill Buddy, 50 ft. or 100 ft., as ordered, with battery installed
Battery wall charger
Pump Fill Kit
Pump Removal Tool
Operator’s Manual
Optional Items:
Roller with well head adapter
Cigarette lighter adapter battery charger
Battery charger cable with battery
“alligator” clips
Additional product pumps
Extra battery
Warning! Explosive Vapors.
The Spill Buddy is not an explosion proof device.
Its use within a classified area requires monitoring of the work site to insure
explosive vapors are not present. The AHJ may require a valid HOT WORK
permit, with testing of the LEL and HEL at intervals. The probe is designed to operate in
an explosive atmosphere, i.e. a recovery well. The reel body and recovery container
should be positioned outside of any classified hazardous area. CET recommends
maintaining a distance of three (3) feet or greater from the wellhead during use.
Warning!
Never leave the Spill Buddy operating unattended during recovery
events. This devise is not intended to for use without an operator present.
Warning! Risk of Grounding Arc!
This device is designed to dissipate
potential static charge through its base grounding plate. Never operate this
device while it is not in contact with the ground. Portable product containers
must also be set on the ground with the discharge tube clamp connected to the
container. The clamp is electrically connected to the reel assembly
.
Warning!
Insure the Pump Flooding Procedure has been performed prior to
use, see page 8.
Envirotecnics
Tel: +34 872 080 542
envirotecnics@envirote
cnics.com
www.envirotecnics.com
