Envirotainer RAP e2, Руководство по эксплуатации

Страница: 17 / 46

Operations Manual
3. CHARGING
RAP e2 container
3.3 CHARGING WITH DAMAGED CABLE OR CABLE WINDER
In the event that the cable or cable winder has been damaged and can no longer be used, the
cable winder may be bypassed for charging.
The recommended procedure is:
1.
Open the cover of the charging unit.
Fig. 5
2.
Pull out the adapter case. When the
adapter case reaches the stop, continue
pulling the case to reach the CEE industry
plug (
Fig. 6 ).
Fig. 6
3.
Disconnect the charging cable and
connect the appropriate type of adapter.
4.
Connect an extension cable to the adapter.
NOTE!
Use as short cable as possible and make sure the cross-section of the wires is at least 2.5 mm²
(0.0039 inch²).
11 (40)
Doc No:
MO-RAP-3079 Revision:
17 State:
Released Release Date:
2019-04-25 Approved By:
maxf