+1.800.343.5319 or +1.843.881.6560 envexp.com
Environmental Express
• 4
HotBlock
®
TKN:
Operation & Instruction Manual
Getting Started
Installation Requirements
Locate the HotBlock® TKN under a fume hood with a minimum face velocity of 100
fpm, and allow a minimum of 2” of space on all sides. The following environmental
conditions should be observed:
• Ambient temperature range:
5 to 30°C
• Ambient relative humidity:
0 to 90%RH
• Altitude:
sea level to 2500 meters
HotBlock® TKN is rated as
Pollution Degree 2
and
Installation Category 2.
Electrical Requirements
Required Voltage:
240 volts, ~60Hz, 15A
Power should not vary greater than ±10%. Use the supplied heat-resistant power
cord or equivalent to connect to the power supply.
For safety reasons, a separate power receptacle should be provided for each unit in
the system. Do not use extension cords or outlet adapters. Make certain that power
outlets are earth-grounded at the grounding pin.
