11
NA0702P01 REV A
12/03/2019
7.4.3
Last Cycle Runtime (LAST (s))
Last runtime represents the duration of the previous completed pump cycle. This value is displayed as
LAST (s): XXs
,
where XX is the last runtime duration in seconds. This parameter is not saved through power loss.
7.4.4
Minimum Runtime (MIN RUN (s))
The minimum runtime represents the duration of the shortest completed pump cycle since the last reset. This value is
displayed as
MIN RUN (s): XXXs
, where XXX is the minimum runtime duration in seconds.
7.4.5
Maximum Runtime (MAX RUN (s))
The maximum runtime represents the duration of the longest completed pump cycle since the last reset. This value is
displayed as
MAX RUN (s): HH:MM:SS
and has the same limits as the normal hours.
7.4.6
Average Runtime (AVG RUN (s))
The average runtime represents the duration of the average completed pump cycle since the last reset. This value is
displayed as
AVG RUN (s): XXXs
where XXX is the average runtime duration in seconds.
7.4.7
Minimum Amps (MIN AMPS (A))
The minimum Amperage reading represents the minimum amperage draw the motor has experienced while running
since the last reset. This value is displayed as
MIN AMPS (A): X.XA
where X.X is the minimum Amperage to the nearest
tenth. This parameter is not saved through power loss.
7.4.8
Maximum Amps (MAX AMPS (A))
The maximum Amperage reading represents the maximum amperage draw the motor has experienced while running
since the last reset. This value is displayed as
MAX AMPS (A): X.XA
where X.X is the maximum Amperage to the nearest
tenth. This parameter is not saved through power loss.
7.4.9
Average Amps (AVG AMPS (A))
The average Amperage reading represents the average amperage draw the motor has experienced while running since
the last reset. This value is displayed as
AVG AMPS (A): X.XA
where X.X is the average Amperage to the nearest tenth.
This parameter is not saved through power loss.
7.4.10
Minimum Volts (MIN VOLTS (VAC))
The minimum Voltage reading represents the minimum voltage the motor has experienced while running since the last
reset. This value is displayed as
MIN VOLTS (VAC): XV
where X is the minimum Voltage to the nearest volt. This
parameter is not saved through power loss.
7.4.11
Maximum Volts (MAX VOLTS (VAC))
The maximum Voltage reading represents the maximum voltage the motor has experienced while running since the last
reset. This value is displayed as
MAX VOLTS (VAC): XV
where X is the maximum Voltage to the nearest volt. This
parameter is not saved through power loss.
7.4.12
Average Volts (AVG VOLTS (VAC))
The average Voltage reading represents the average voltage the motor has experienced while running since the last
reset. This value is displayed as
AVG VOLTS (VAC): XV
where X is the average Voltage to the nearest volt. This
parameter is not saved through power loss.
8
Trouble Operation
Several less serious operating conditions can be detected and indicated to warn of pending, more serious faults. These
conditions do not warrant an immediate response and may clear themselves given time.
8.1
Excessive Runtime Operation
Excessive Runtime is a trouble condition that is initiated if an individual pump run cycle exceeds the set Run Limit value.
If the Run Limit is exceeded, the alarm history will show a run limit exceeded trouble condition. Pump operation will be
unaffected.