ENVIROBOSS EB140, Руководство пользователя

Страница: 1 / 27

07-02183A EB140 1 Legend Brands.
Owner’s Manual
EB140 Portable Dehumidifier
Legend Brands
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 www.EnviroBoss.com
The
EnviroBoss™ EB140 reduces humidity in enclosed environments by removing water vapor from
the air.
Patents: http://www.LBpatents.com
S A V E T H E S E I N S T R U C T I O N S
SAFETY INSTRUCTIONS
WARNING! Do not alter or modify your unit in any
way. Use only replacement parts authorized by Leg-
end Brands. Modifications or use of unapproved
parts could create a hazard and will void your war-
ranty. Contact your authorized distributor for assis-
tance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.

Inspect the power cord before use. If cord is dam-
aged, do not use. Always grasp the plug (not the
cord) to unplug.

Insert three-prong plug on power cord into a match-
ing electrically grounded outlet. Do not use adapter.
Never cut off third prong. Do not use an extension
cord.

The unit must be operated on a 115V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.

Keep motor and wiring dry.

Do not attempt to repair the unit. For Authorized
Service Centers, contact EnviroBoss.
BEFORE YOU BEGIN
Warranty
If you determine service is required, have your equip-
ment model, serial number and original proof of pur-
chase available and call your distributor for assistance
with obtaining a return material authorization (RMA).
INTRODUCTION
The EB140 Dehumidifier reduces humidity in enclosed
environments by removing water vapor from the air.
How the EB140 works
The EB140 refrigerant dehumidifier uses a fan to draw
moist air in and condenses it into water that collects in a
tray and is automatically pumped out through a drain
hose.
The EB140 is preset to automatically maintain a 50% RH
level. To change this setting, see “Humidistat Mode” be-
low. Note: Unit automatically shuts off below 40% RH.
WARNING
CORRECT PLUG REMOVAL
Grasp IEC plug and pull straight out
IMPORTANT: Damage to IEC receptacle or dehu-
midifier resulting from improper removal of the
power cord is not covered by warranty. The IEC
power cord is a wear item and is not covered by
warranty.