Figure 16: Screws to take out to remove
stove from pallet.
Installation
R
emoving
p
eLLet
S
tove
f
Rom
p
aLLet
anD
i
nStaLLing
H
eaRtH
p
aD
:
Figure 15: Screws at the back of the
cabinet side.
Figure 14: Screw behind ash box.
Tool Required:
● T-20 screwdriver
●
5
/
16
” socket or flat head
screwdriver
Installation:
1. Slide a hearth pad tab
through each of the three
(3) slots on the hearth pad
so the slotted end is up and
secure in place with a T-20
screw through the pad into the tab (refer to Figure 13).
2. Open the ash pan cover from the right then lift the cover up and
out to unhook the hinges at the left.
3. Remove the cab sides.
a) Ensure the screws behind the ash box (Figure 14) and the three
(3) on each side at the back (Figure 15) are loosened.
Figure 13: Installing tabs into hearth
pad.
Figure 17: Mini Bern Hearth Pad in Place.
b) Remove knob and collar from slider rod.
c) Pull the cab sides straight out.
4. Using a
5
/
16
” socket or flat head screwdriver, remove the three
(3) wood screws that are holding the bottom of the stove to the
pallet. There is one (1) screw behind each side panel and one (1)
at the back behind the back grill (refer to Figure 16).
5. Loosen the three (3) T-20 screws from the base of the unit (see
Figure 17).
6. Either lift the unit up and
place it into the hearth pad
or carefully place the unit
on its back; it can rest on
the pallet it was shipped
on (allow the pipes to fit
through an opening in the
pallet).
7. Align the three (3) tabs on
the hearth pad to the three
(3) screws on the unit (see
Figure 6), slide
together,
and
tighten the T-20
screws.
8. Adjust the leveling
legs to level and
support stove.
9. Re-install the cab
sides and ash pan
cover.
15
Содержание MINI C-14593
Страница 39: ...Notes 39 ...