Enviro Maxx-1, Руководство по установке

Страница: 5 / 12

5
7. Remove old lid gasket, a utility knife may be required.
8. Install Front HDK assembly. Assembly should slide downward into place and is secured using two
#8 sheet metal screws. Screws thread into top holes where front original grill was mounted.
Figure 7: Original lid gasket removal. Figure 8: Front HDK assembly install.
9. Install Back HDK assembly, fi rst attach back plate using original hinge screws and existing hinge
mount holes.
10. Attach the hopper extension side fl anges where the screw clearance holes are cut, line up edge
of hopper extension with edge of support rail and use self drilling screws to secure. Attach front
fl ange on hopper extension using self drilling screw.
Figure 9: Back HDK assembly install.
Figure 10: Back HDK assembly secure.