Enviro G39LI Скачать руководство пользователя страница 26

Страница: 26 / 60

Initial Installation

QUALIFIED INSTALLERS ONLY

Figure 37: Outer finishing edge

removal / replacement

There are multiple ways to finish a G39 fireplace. Here is what you need to know to properly install the

desired finishing material.
There are three finishing edge options.

inishinG

iRepLace

1. Outer Finishing Edge (Short)

- This finishing edge comes

mounted to the unit with screws. This finishing edge is 0.5”

deep and will accommodate finishing materials up to 0.875” in

thickness. The surround panel will sit on the inside of this finish-

ing edge. This means the finishing edge is offset 0.25” from the

surround panel creating a border. This option will not cover the

cut edge of the finishing material so it needs to be finished in an

aesthetically pleasing way.

2. Outer Finishing Edge (Long)

- This finishing edge comes

wrapped in foam on top of the unit. This finishing edge is 1”

deep and will accommodate finishing materials of 1” or more

in thickness. The 0.5” Finishing edge installed on the unit will

need to be removed and replaced with this trim. The surround

panel will sit on the inside of this finishing edge. This means the

finishing edge is offset 0.25” from the surround panel creating

a border. This option will not cover the cut edge of the finishing

material so it needs to be finished in an aesthetically pleasing

way. This is ideal for thicker finishes like stone.

Outer Edge

Inner Edge

Surround Border

3. Inner Finishing Edge

- This finishing edge is integrated into cabinet of the fireplace. The Outer Finishing

(Short) will need to be removed. The surround panel once installed will overlap the inner finishing edge. This

means the surround panel will hide the edge of the finishing material. This ideal for finishing materials 0.75”

or less and the it is desired to hide.

Figure 38: Finishing edges

Activation -

Remove CSS plug using 1/4”

deep socket or flat head screwdriver.

The CSS system is now activated.

Содержание G39LI





























































Результаты поиска

Содержание G39LI

Отзывы:

Бренды по названию

Популярные бренды

Enviro G39LI, Руководство пользователя

Результаты поиска

Содержание G39LI

Отзывы:

Бренды по названию

Популярные бренды