f
iRebox
L
ineR
anD
b
uRneR
t
Ray
R
emoVaL
/i
nstaLLation
:
NOTE: The porcelain on the firebox liners is fragile and should be handled gently.
1.
Ensure the E33G is turned off and allow the unit to completely cool.
2. Remove the glass door as shown in the
m
aIntenance
anD
s
erVIce
- g
lass
D
oor
r
emoVal
.
WARNING:
Do not touch or attempt to remove the door if the fireplace is not completely cool.
Never operate the fireplace with the door removed.
3. Remove the glass material (if installed).
4. Use the following steps to remove the liners and the burner tray.
NOTE: Follow the steps in the reverse order for reassembly.
Secondary Installation
28
WARNING
: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
Figure 36:
Remove the side panel retainer clips
which secure the side.i
Figure 35:
Remove the two nuts which hold
down the burner. Gently pull the burner
forward to remove it from the Venturi Box.
Figure 34:
Remove the eight T20 screws and
then remove the glass tray panel by lifting up.
Figure 37:
Remove the side panels then the
back panel.
