Enviro C-11288 Скачать руководство пользователя страница 33

Страница: 33 / 34

20. Sherwood Industries Ltd. is free of liability for any damages caused by the fireplace or stove, as

well as inconvenience expenses and materials. The Limited Warranty does not cover incidental or

consequential damages.

21. The Limited Warranty does not cover any loss or damage incurred by the use or removal of any

component or apparatus to or from the Enviro fireplace or stove without the express written

permission of Sherwood Industries Ltd. and bearing a Sherwood Industries Ltd. label of approval.

22. Any statement or representation of Enviro products and their performance contained in Enviro

advertising, packaging literature, or printed material is not part of the Limited Warranty.

23. The Limited Warranty is automatically voided if the fireplace or stove’s serial number has been

removed or altered in any way. If the stove is used for commercial purposes, it is excluded from the

Limited Warranty.

24. No dealer, distributor, or similar person has the authority to represent or warrant Enviro products

beyond the terms contained within the Limited Warranty. Sherwood Industries Ltd. assumes no

liability for such warranties or representations.

25. Sherwood Industries Ltd. will not cover the cost of the removal or re-installation of the stove, hearth,

facing, mantels, venting or other components.

26. Labour to replace or repair items under this Limited Warranty will be covered per our warranty service

fee reimbursement schedule. Labour rates are set per component and as such total labour costs may

not be covered.

27. Sherwood Industries Ltd. is not liable for freight or labour on any stove replaced in-field and is not

liable for travel costs for service work. In the event of in-home repair work, the customer will pay any

in-home travel fees or service charges required by the Authorized Dealer.

28. At no time will Sherwood Industries Ltd. be liable for any consequential damages which exceed the

purchase price of the unit. Sherwood Industries Ltd. has no obligation to enhance or modify any

stove once manufactured (example: as a stove evolves, field modifications or upgrades will not be

performed).

29. This Limited Warranty is applicable only to the original purchaser and it is non-transferable.

30. This warranty only covers Enviro products that are purchased through an authorized Enviro dealer.

31. If for any reason any section of the Limited Warranty is declared invalid, the balance of the warranty

remains in effect and all other clauses shall remain in effect.

32. The Limited Warranty is the only warranty supplied by Sherwood Industries Ltd., the manufacturer

of the stove. All other warranties, whether express or implied, are hereby expressly disclaimed and

purchaser’s recourse is expressly limited to the Limited Warranty.

33. Sherwood Industries Ltd. and its employees or representatives will not assume any damages, either

directly or indirectly, caused by improper usage, operation, installation, servicing or maintenance of

this stove.

34. Sherwood Industries Ltd. reserves the right to make changes without notice. Please complete and

mail the warranty registration card and have the installer fill in the installation data sheet in the back

of the manual for warranty and future reference.

35. Sherwood Industries Ltd. is responsible for stocking parts for a maximum of seven (7) years after

discontinuing the manufacture or incorporation of the item into its products. An exception to this

would be if an OEM supplier is not able to supply a part.

Warranty

Содержание C-11288



































Результаты поиска

Содержание C-11288

Отзывы:

Похожие инструкции для C-11288

Бренды по названию

Популярные бренды

Enviro C-11288, Руководство пользователя

Результаты поиска

Содержание C-11288

Отзывы:

Похожие инструкции для C-11288

Бренды по названию

Популярные бренды