26
2.5 Calibration
Calibration sub-menu for sensor 2
2.5.1 Calibration factor
Input:
0.01 … 9.99
Factor for the subsequent adjustment of the
actual measurement of sensor 2.
2.5.2 P1 value
Input:
measurement
Output measurement in the selected
mass/time unit.
2.5.3 P1 calibration
Transfer:
raw value
Transfer of the current raw value (filtered)
from the mass flow with the key [
←
].
The value can also be entered directly.
. . . (depending on the number of support points)
For additional support points (depending on
[ 2.3 ]), additional value pairs can be set.
2.6 Calibration
Calibration sub-menu for sensor 3
2.6.1 Calibration factor
Input:
0.01 … 9.99
Factor for the subsequent adjustment of the
actual measurement of sensor 3.
2.6.2 P1 value
Input:
measurement
Output measurement in the selected
mass/time unit.
2.6.3 P1 calibration
Transfer:
raw value
Transfer of the current raw value (filtered)
from the mass flow with the key [
←
].
The value can also be entered directly.
. . . (depending on the number of support points)
For additional support points (depending on
[ 2.3 ]), additional value pairs can be set.
