21
In the panel, you can select each type of dust separetaly and rename them if necessary.
Name:
Name of the dust, you can rename it if necessary.
Unit:
You can change the unit.
Attention:
It only change the unit name and not the value.
You need to use „Coef A“ to modify the value.
Coef A:
As the standard unit is mg/m
3
, the Coef is 1.
If for exemple you want to have an output in
µ
g/m
3
, you will ne to have a Coef A = 1000
The save panel offer you the possibility to save sensor settings and to update eSAM interface.
Save:
It will save sensor parameter in a file that can be stored.
Recover:
You can recover sensor parameter from a previsouly save file.
Update:
In case of major update of the system, you will receive it.
You can then browse your system to the file and make the update.