Pixel Triton User Manual
Part No.: 51322
For latest version visit:
www.enttec.com
25 October 2018
mfile ID: 4815381
Page|
1
Package Contents
•
Pixel Triton (75020-12 or 75020-24)
•
IEC power cord (country dependent plug)
•
Read Me Card
•
3PIN Pixel Breakout connector
Safety Information
•
This unit is intended for indoor use only.
•
Do not expose this device to rain or
moisture, doing this will void the warranty.
•
Make all the connections before you plug in
the mains power
•
Do not remove the cover, there are no user
serviceable components inside.
•
Never plug this unit in to a dimmer pack
•
Ensure proper earth connections
•
Always be sure to mount this unit in an area
that will allow proper ventilation. Allow
about 6 inches (20 cm) between this device
and a wall.
•
Power-supply cords should be routed so
that they are not likely to be walked on or
pinched by items placed upon or against
them, pay particular attention to the point
they enter and exit the unit.
LED Protocols Supported
•
9PDOT-8bit
•
9PDOT-16bit
•
WS2811, WS2812, WS2812B, WS2813
•
SK6812
•
TM1804
•
TM1812
•
UCS2903 and UCS2904
•
APA-104 LEDs
Note:
We cannot claim to support all led protocols, but if you
do happen to find one that does work, and is not listed,
please let us know, so we can update our
documentation
Physical Dimensions
