Enttec Phero, Руководство по эксплуатации продукта

Страница: 1 / 6

Product Manual
50824
For latest version visit:
www.enttec.com
1
ID: 226394
Back Panel
Box Contents

ENTTEC PHERO (73900 or 79001)

Mounting brackets

This user manual
Features

30 independently controllable RGB Pixels

Flexible, light and slick design

In-built Power Supply

Compatible with ENTTEC Pixelator and Pixie driver

Plink data bus allows to daisy-chain up to 11 units

Standard Cat6 wiring allows up to 300m distances

Mains power through Powercon connectors for
convenient installation

50.000+ hours expected LED life

Up to 90 DMX channels through Pixelator
 Over voltage input protection
Safety
 Mains voltages inside, please never intend to open
it when mains connected

Do not expose the ENTTEC Phero to rain or moisture,
doing this will void the warranty

Do not remove the cover, there are no serviceable
parts inside

This unit is intended for indoor use only
 Ensure proper earth connections
Basic Setup

Connect the ENTTEC Phero to a Plink enabled device
such as ENTTEC Pixelator using a cat5/6 cable

Power up the unit using the blue powercon
connector. The power LED should light up
 Feed some data through your Plink enabled device