-4-
-5-
3. Terminal Descriptions
MIC adjustment
SPK adjustment
1
2
3
4
ON
DIP
Lock Control Jumper
Doorstation Code DIP
3
2
1
BUS PL
S1+ S2+ S-
Main Connect Port
• Lock Control Jumper: To select the lock type: see section 5
• Doorstation Code DIP: It supports total 4 door stations,see section 6
• MIC: Adjust the volume of Microphone
• SPK: Adjust the volume of Speaker
• Main Connect Port: To connect the bus line and the electronic locks.
• BUS: Connect to the bus line, no polarity.
• PL: External lock power input, connect to the power positive(power +).
• S1+, S2+: Lock power(+) output, to connect 2 locks.
• S-: Lock power(-) output, connect to the power(-) input of locks(only when using the camera to power the
locks, if using the external power supply for the locks, the S- should not be connected).
2.3 Adjusting Camera Angle
2.2 Placing Name Label
Move the plastic cover away to
open the transparent name label
cover, insert name paper, then
put the plastic cover back to the
panel.
Use a screwdriver to loosen the
screw and adjust the angle for
the camera, then fix the screw.
