Entrotec PRO-DPC, Инструкция по установке и настройке

Страница: 7 / 28

Factory Default Settings
7
4 Factory Default Settings
Setting Default
IP Address 192.168.1.110
Subnet 255.255.0.0
Gateway 192.168.1.1
Device Admin Code 8, 8, 8, 8, 8, 8
Block No. 0
Door No. 8001
5 Assign an IP address
5.1.1 Configure Network Settings on Device
Before initialising a Call Panel, the default IP address should be configured to avoid conflicts with
other devices with the same default settings. To apply the new network settings, enter the
programming menu on the Call Panel by pressing the call button
, then the Device Admin Code
(default = 888888), then the call button .
FIGURE 5-1
i. The first option in the menu ‘IP Config’ is selected, press the call button .
FIGURE 5-2