Entrotec PRO-DPC, Инструкция по установке и настройке

Страница: 12 / 28

Provision
12
iv. Select SIP Server .
FIGURE 8-2
v. Uncheck Enable , this disables the internal device SIP Server which is on as default.
vi. For Sever Type select VTO .
vii. Enter the Main Call Panel IP Address , Port 5060.
viii. Press Save .
NOTE
The device will reboot if the SIP Server is enabled or disabled. This might take up to 2 minutes.
8.1.2 Configure SIP ID
i. Login to the Call Panel as described in section 7.
ii. Navigate to Local Settings > Basic .
iii. Set the Block Name - the text displayed on the first line when the panel is in its idle state.
iv. Set the Door No. - each Call Panel on a block should have a unique number.
v. Press Confirm .
FIGURE 8-3