Entrematic EM SW EMO, Инструкция по установке и обслуживанию, Страница: 69 / 74

18 Installation instructions for Accessories
18.1 Armsystem PULL-P
65
(
2
9
/
16
"
)
109* (
4
19
/
64
"
)
65
(
2
9
/
16
"
)
623 (
24
17
/
32
"
)
L
C
12
8
8
7
9
1
16
16
6
4
2
5
3
8
3
5
1
13
8
10
11
15
15
15 15
15
B A
C
ø 9,5 (
3
/
8
"
)
14
End caps 13 Door stop 7 Short slide track 1
Flexible steel hose FLS 14 Rubber absorber 8 Long slide track 2
Fastening hole (4 pcs) 15 Magnetic switch G1 9 Ball catch 3
Lock screws 16 Magnet 10 Arm stop 4
Reveal spacer (optional) 40 / 60 mm (1
37/64" / 2 23/64") Art. No. 173 831BK 17 Crimp connectors 11 Ball seat 5
Drive arm 12 Hinge 6
18.1.1 Mounting instruction for magnetic switch G1
To make sure that the operator is disconnected when the door is paniced a switch must be connec-
ted to kill.
a Drill a 9.5 mm (3/8") hole in the door leaf just behind the magnet for the magnetic switch G1.
b Extend the cable length for the switch G1.
c Mount the magnetic switch G1 and the flexible steel hose FLS in accordance with the picture.
d Connect G1 to kill.
18.1.2 Installation of PULL-P
a Mark and drill the 4 fastening holes ø 4,6 (3/16") in the door leaf.
b Mount the two short slide tracks.
c Slide the hinge into the short slide track next to the door hinge and make sure they are aligned
(A). Secure with the lock screw.
d Slide the long slide track into the hinge and make sure they are aligned (B). Secure with the
lock screw.
e Slide the ball catch into the short slide track at the front of the door and make sure they are
aligned (C). Secure with the lock screw.
69 Issue 2014-11-24 1005088-EMEI-11.0
18 Installation instructions for Accessories