Entrematic EM PSL150, Руководство пользователя, Страница: 9 / 22

Note! If monitored emergency unit is a demand, a test of the emergency unit is performed when
the operate mode selector is set from OFF or OPEN to any other operation mode.
Access codes and flashing light
Codes
2
3
5
4
A
A
B
SECTION A-A
DETAIL B
SCALE 5 : 1
* Assembled on site
1 pcs. PLASTIC BAG 150x200 701002
7 1 pcs. WIRING HARNESS MS BASIC RJ45 CABLE 1008972 *
6 1 pcs. Software MS BwL 1007926
5 1 pcs. PCB Assembly Mode Selector Basic with LED 1008140
4 1 pcs. Pin flush mounted MS 1008773
3 1 pcs. STICKER EM SL 40x80 5 POS SYMBOL 1010411 *
2 2 pcs. SCREW ISO 7049 C (RTS) ST2.9x16 FZB 4.8 724462 *
1 1 pcs. FRAME 40x80 Flush 1008102
Pos. Qty. Unit Description Art.no. Remark
All rights in and to this material are the sole property of ASSA ABLOY Entrance Systems AB. Copying, scanning, alterations or modifications are expressly forbidden without the prior written consent of ASSA ABLOY Entrance Systems AB.
©
0.4
12-586
Date Done CM-No. Change No.
SEJOB
-
1 (1)
Sheet
Remark
Date
Size Rev.
Drawing No.
Drawn Status
Material
Scale
ISO 2768
Surface treatment
General tolerance
Description
Proj. method
A3
-
1:1 SEJOB
40x80 FLUSH 5 SYMB
MODE SELECTOR EM SL
0.4
1010412
Draft
ASSA ABLOY Entrance Systems AB
New article
Flashing
light
Up
Down
Three alternative selectable codes are used.
The default access is obtained by pushing the arrow symbol
pointing up or down for 2 seconds. 1
An optional access code can be selected where the access is
obtained by briefly pushing in turn the arrow up symbol, followed
by the arrow down symbol, followed by the arrow down symbol
again and at last the arrow up. The entire code must be entered
within 3 seconds. 2
No access code. 3
The different operation modes are selected by pushing the arrow
symbols pointing upwards or downwards. When a button is pushed
a buzzer will sound. The present selection is indicated by a blue light
to the left of the function symbol or text.
When an arrow symbol has not been pushed for 15 seconds the access
will be locked.
Flashing light
Red • A red light every other second is indicating an error
in the door operator. If the error remains after a
RESET then service is needed.
• If the red light is quickly flashing 3 times per second
it is indicating an internal error in the operation
mode selector.
An orange light every other second is indicating a status
or condition that can be cleared by the owner e.g. a
break-out door is standing open. Orange
A yellow light every other second is indicating that
maintenance is needed. Yellow
9 Issue 2016-03-14 1009216-EMEI-4.0