21
ENTR® Dead Bolt User Manual
4.1 Mounting the Touchpad Reader
Select the location where the Touchpad Reader will be
mounted.
• Attach the Touchpad Reader baseplate to the wall.
• Use 4 screws and screw anchors, or double sided
adhesive strip.
4.2 Battery Replacement
1. Release lid screw and open the lid.
2.
Put in the batteries (2xAA) according
to the "+" "-" signs.
3.
Close the lid and tighten the screw.
Notes:
• After inserting the batteries the Touchpad
Reader will turn on automatically.
• A short beep sound emitted and Green
[OK]
indication illuminated for 2 seconds.
Important:
Do not touch the Touchpad during
the self test procedure and until the lights
are off.
4.2.1 Low Battery Indication
When batteries need replacement, a red
warning signal will blink rapidly and long beep
will sound during every lock/unlock action.
4. Touchpad Reader
