14
ENTR® Dead Bolt User Manual
Lock configuration failed
1. Remove the mechanical key from the lock.
2.
Check that the door was closed properly or if
lock operation was interfered.
Troubleshooting #1
Press
[Cfg]
The lock will carry out the
configuration process.
8
[OK]
Indication blinks once.
2 short beeps emitted,
Illuminated buttons turn off.
Configuration OK
[Manual]
indication illuminated.
[Cfg]
indication blinks.
Note:
If the configuration fails
refer to troubleshooting #1
Configuration OK
Hold the door shut to avoid opening.
The lock will carry out the
configuration process.
It take's 15-20 seconds to complete.
6
Open the door using the handle.
Bring the latch as close as possible to
the door molding.
Note:
Do not shut the door.
7
Door
moldings
Latch
Magnet
[Cfg]
indication blinks.
Turn the knob manually to unlock
position and keep the door closed.
Push on
[Cfg]
7
