Important Safety Instructions
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A ground
ing type plug has two blades and a third grounding prong. The wide blade
or the third prongs are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obso
lete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
To reduce the risk of electric shock, DO NOT remove cover or back panel.
No user serviceable parts inside. Refer servicing to qualified personnel.
Declaration of Conformity
&.
&.
&.
CE
l+I
&.
c@us
LISTED
To ensure proper use of this product, please read this manual carefully and retain it for future reference.
Should the unit require maintenance, contact an authorized service location.
WARNING: This symbol indicates the presence of uninsulated dangerous voltage within the product's
enclosure that constitutes a risk of electric shock. Do not open the product's case.
CAUTION: This symbol indicates you must take care; there is risk of damage to the equipment or to
yourself.
Declaration of Conformity (Europe Only)
This product is in conformity with the Council Directives:
• EMC Directive 2004/108/EC
• Low voltage Directive 2006/95/EC
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Ce dispositif est conforme
a
la norme CNR-210 d'lndustrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit
pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage re<;u, y compris
un brouillage susceptible de provoquer un fonctionnement indesirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Declaration d'exposition aux radiations:
Cet equipement est conforme aux limites d'exposition aux rayonnements IC etablies pour un environne-
ment non contr6Ie. Cet equipement doit etre installe et utilise avec un minimum de 20 cm de distance
entre la source de rayonnement et votre corps.
Product Name --
Model Name
Manufacture Date-
year/month/date
,,,,--�
/,:. . -- '"°"
--·---
Kamal
Model: Su
11111111111111111111111
1
\
Input Voltage·
12V=1A
SIN: 26-XXXXXXX
POWER·
IIIIIIIIIIIIIUIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
12W
MFGOate
MAC: 00:03:ES:XX:XX:XX
YYMMOD
l
lllll
l
U
ll
]
IIIIIIiil
l
ll
FCC 10:XXXXXX
05-JOOOOOHOI
I/
CE<D
�
·�·;;;.-
:a-
-
�=EENCHINE
Serial number
- 26-0000000-26-9999999
Important Safety Instructions (Continued)
To help prevent electric shock, plug the power cable into properly ground
ed sources. Use only properly grounded extension cords and adaptors, if
they are needed.
The AC main plug is used as the disconnect device, the disconnect device
shall remain readily operable.
Make sure nothing is lying on any of the cables.
Be sure the cables are located where they will not be stepped on or tripped
over.
Do not spill food or liquids onto the unit.
Do not push any objects into the free slots. Doing so will damage the unit,
can cause fire or electrical shock, and can short out interior components.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not block cooling vents.
Do not place the equipment in a closed-in wall unit.
When you disconnect a cable, pull on its connector or on its strain relief
loop, not on the cable itself. Some cables have a connector with locking
tabs; if you are disconnecting this type of cable, press in on the locking
tabs before disconnecting the cables.
When you connect a cable, make sure both connectors are correctly ori
ented and aligned before connecting to avoid bending connector pins.
For PLUGGABLE EQUIPMENT, the socket-outlet should be installed near the
equipment for easy access.
Changes or modifications not expressly approved by the party responsible
could void the user's authority to operate this device.
Declaration of Conformity (Continued)
To prevent fire or shock hazard, do not expose this product to rain or moisture. To reduce the risk of
electric shock, DO NOT remove the cover or back. No user serviceable parts are inside. For servicing refer
to qualified personnel.
Declaration of Conformity (United States Only}
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Com
munication Commission (FCC) Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television recep
tion, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to a different circuit from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compli
ance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmit
ter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
COPYRIGHT ©2014 Entone, Inc. All rights reserved. Entone, Kamai and "connecting the home" are registered trade
marks of Entone, Inc. All other trademarks or registered trademarks belong to their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
P /N: 99-708804-02 - V2.1
