Entone Hydra HD - B Serie, Руководство пользователя

Страница: 35 / 49

Hydra HD – B Series User’s Guide
Copyright
   
2007 Entone, Inc. All rights reserved
. 33
3. Select the decoder to register by:
Press “1” to register URC PLUS to decoder 1.
Press “2” to register URC PLUS to decoder 2.
Press “3” to register URC PLUS to decoder 3.
After you enter a registration event, the “STB” button backlight on the URC PLUS will blink twice to
indicate that the registration process was successful.
The Hydra HD front panel will display “RC REG Dx” to indicate that the registration process was
successful.
Figure 10-8 Remote Registration Successful
Pressing a key other than “0”, “1”, “2”, “3” or a button is not pressed within 10 seconds, the “STB”
backlight will extinguish and the URC PLUS registration process will be terminated.
4. If the Hydra HD does not receive any URC PLUS registration event within 30 seconds, the process will
be terminated.
The Hydra HD front panel displays the following messages during remote control registration:
Table 10-1 Remote Registration Messages
Front Panel Message Description
RC REG TO Registration times out
RC REGERR Registration error
RC REG In registration mode
RC REGEND Registered to IR only mode
RC REG D1 Registered to decoder 1
RC REG D2 Registered to decoder 2
RC REG D3 Registered to decoder 3
Here are some principles of the remote registration method:
Each decoder allows a maximum of 3 remote controls to be registered and a registration list is
maintained. If the user has registered 3 remote controls and tries to register another remote control, the
first registered remote control will be removed from the registration list. This works as a first-in-first-out
fashion.
Each remote control can only be registered for one decoder. If user tries to register a remote control
which is already registered to another decoder, that remote registration will be removed from the
original registration list.
The registration list is maintained in order. If the secondly registered remote control is removed from the
list, the third entry will move forth to the second and the third will be blank for a new remote control to
be registered.