16
2.Using the Product
2.1 Setup
When you switch on the product for the first time, you will see the language selection menu and the
Tutorial Mode will be active. After the Tutorial Mode screens, you will proceed to the configuration
screens for Region Selection, Time Setting, Date Setting, CT Primary, CT Secondary, Target CosΦ,
Reference Step settings respectively, you will enter them in accordance with the required information
and proceed to the Auto Setup screen. If a power failure occurs before the settings are saved, these
setting screens will be displayed again in the next startup.
3.Menus
Your product consists of 8 main menus. These Main Menus are:
•
Power Factor Correction
•
Power
•
Energy
•
Measurements
•
Harmonics
•
Messages
•
Settings
•
Cos Φ
3.1 Settings Menu
You can press HOME and use the up and down keys to access the Settings menu. If you wish to
do something under the Settings menu or change the settings, press OK to go to menu details and
change Product or User settings under the Settings menu. Under the Settings menu, the Home ( )
symbol on the upper left corner of the LCD will go off and the Settings symbol ( ) will light. In the
Settings menu, you can use thee Up and Down keys to navigate submenus and press OK to see or
change menu details. If you have made a change in the menus, you will be asked if you would like to
save the change when you are leaving the Settings menu. If you say Yes, the settings will be saved
on the product. If you say No, the changes will not be saved and you will leave the menu.
Settings that can be changed in the Settings menu:
•
User
•
Setup
•
Power factor correction
•
Communication
•
Alarm
•
Time
•
System
•
Reset
2. Using the Product
2.1 Setup
3. Menus
3.1 Settings Menu