17
18
TRIP
SET
NO
TRIP
TRIP
YES
SET
LATCH
When the latch function is selected as
YES
, a predefined alarm contact will open in case an alarm
state arises. When the alarm state is resolved, the contact remains open (It latches). To close the
alarm outputs after the alarm state is resolved, SET button is pressed. When the latch function is
selected as
NO
, the opened alarm output will close after the predefined delay time.
2.2.3 ANLG OUT Analog Output Setting Menu
ANLG OUT
The device can give a voltage or current output with respect to the measured voltage according to your
selection. Analog output value can be selected as 0-10V, 2-10V, 0-20mA or 4-20mA. The user can set the
analog output type, turn off the analog output, learn the active analog output type or set the minimum and
maximum values which the device will take into consideration when generating an analog output.
LATCH
SET
NO
LATCH
LATCH
YES
SET
ANLG OUT
SET
ANLG OUT
SET
mA
0-20
ANLG OUT
ANLG OUT
ANLG OUT
ANLG OUT
SET
SET
SET
SET
BACK MENU
HIGHEST
200
LOWEST
000
SET
mA
mA
V
V
V
V