Enterasys VHSIM2-A6DP Скачать руководство пользователя

Страница: 78 / 118

LEC Administration Screen

3-44

Local Management

3.13.1 Changing the LEC Status of an Existing LEC

To change the LEC Status, perform the following steps:

Use the arrow keys to highlight the MODIFY MODE command at the bottom of the screen
and press ENTER.

Use the arrow keys to highlight the LEC Index field.

Enter the Index of the LEC to be modified, and press ENTER.

Use the arrow keys to highlight the LEC Status field.

Use the SPACE bar to toggle between the options (Active or Not In Service) until the desired
option displays.

Use the arrow keys to highlight the SAVE command and press ENTER. The new LEC Status
becomes enabled.

3.13.2 Configuring a New LEC Automatically

To configure a new LEC automatically, perform the following steps:

Ensure the LEC Administration screen is in CREATE MODE. If the screen does not display
“CREATE MODE”, perform the following substeps:

Use the arrow keys to highlight the CREATE MODE command at the bottom of the
screen.

b. Press ENTER. The LEC Administration screen, in CREATE MODE, displays.

Use the arrow keys to highlight the LANE Version field.

Press the SPACE bar to toggle between the options (1.0 or 2.0) until the desired LANE version
displays.

Use the arrow keys to highlight the Configure LEC field.

Press the SPACE bar to toggle between the options until Automatic displays.

NOTE: To discover the Index of the LEC that will be modified, refer to

Section 3.12

Содержание VHSIM2-A6DP























































































































Результаты поиска

Содержание VHSIM2-A6DP

Отзывы:

Похожие инструкции для VHSIM2-A6DP

Бренды по названию

Популярные бренды

Enterasys VHSIM2-A6DP, Руководство пользователя

Результаты поиска

Содержание VHSIM2-A6DP

Отзывы:

Похожие инструкции для VHSIM2-A6DP

Бренды по названию

Популярные бренды