Enterasys 7100G Series, Руководство по установке оборудования

Страница: 60 / 90

Pluggable Transceiver Specifications
A-2 Specifications
Table A-2 describes physical, electrical, and environmental specifications for the 7100G-Series
switch.
Pluggable Transceiver Specifications
For SFP+ and QSFP+ transceiver specifications, refer to the datasheet at the following URL:
http://www.enterasys.com/products/transceivers-ds.pdf
COM Port Pinout Assignments
The COM port is an RJ45 communications port for local access to local management. Refer to the
table below for the COM port pin assignments.
Table A-2 Specifications
Item Specification
Physical (7100G-Series Chassis)
Dimensions 4.37 cm H x 44.73cm W x 43.40cm D
1.72” H x 17.61” W x 17.086” D
Approximate Weight Gross: 7.12 kg (15.7 lb)
Mean Time Between Failure (MTBF) Refer to the MTBF web site at URL
http://www.enterasys.com/support/mtbf/
71A-POE-A or 71A-POE-B
Input Frequency 50 to 60 Hz
Input (Voltage/Current) at Output Power 100 to 240 V AC: 10 - 5A at 800 watts
Approximate Weight 0.86 kg (1.90 lb)
71A-PS-A or 71A-PS-B
Input Frequency 50 to 60 Hz
Input (Voltage/Current) at Output Power 100 to 240 V AC: 5.29 to 2.2A at 450 watts
Approximate Weight 0.86 kg (1.90 lb)
Environmental
Operating Temperature 5°C to 40°C (41°F to 104°F)
Storage Temperature -30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity 5% to 95% (non-condensing)
Table A-3 COM Port Pin Assignments
Pin Signal Name Input/Output
1 Transmit Data (XMT) Output
2 Data Carrier Detect (DCD) Output
3 Data Set Ready (DSR) Input
4 Receive Data (RCV) Input
5 Signal Ground (GND) NA
6 Data Terminal Ready (DTR) Output
7 Request to Send (RTS) Input