Enterasys 7100G Series, Руководство по установке оборудования

Страница: 27 / 90

Mounting the 7100G-Series Switch
Enterasys 7100G-Series Hardware Installation Guide 2-3
Mounting the 7100G-Series Switch
To install the 7100G-Series switch in a rack using the 71A-RACK-U optional rack mount kit, follow
the pre-installation discussion here including: “
Power Supply Air Flow and Switch Fan Module
Air Flow ” on page 2-4 and “ Reversing the Fan Module Air Flow ” on page 2-5, before proceeding
to “ Optional Rack Mount Rail Kit Installation ” on page C-1.
You can install a 7100G-Series switch on a flat surface or in a rack. For more information about flat
surface installation, see “
Flat Surface Installation ” on page 2-12.
There are four possible rack mounting configurations as shown in Figure 2-1 , based upon
whether:
• The switch I/O ports side or the power supply side of the device face front
• The device is mounted flush with the rack posts or mid-mounted
Figure 2-1 7100G-Series Switch Rack Configurations
Note: The 7100G-Series switch comes with integrated mounting ears that are adequate for most
installations. For slide-in mounting, high vibration, or high shock installations, an optional rack
mount kit (71A-RACK-U) is available.
1 Flush mounted with the switch I/O ports facing 3 Mid-mounted with the switch I/O ports facing front
front (cool air side) 4 Mid-mounting with the power supply facing front
2 Flush mounted with the power supply facing 5 Air flow direction
front (cool air side)