manualshive.com logo in svg

entegris InVue CR288, Руководство пользователя, Страница: 16 / 32

Поделиться
Скачать
entegris InVue CR288 Скачать руководство пользователя страница 16

16

INVUE CR288 CONCENTRATION MONITOR

Installation and Use Manual  |  Entegris, Inc.

SENSOR CALIBRATION TAB

Sensor calibration functions are available only when 
Expert Mode is activated. See About/Access Expert 
Mode.

Select Port and Load Memory

1.  Select a port from the drop-down list.

2. Press 

Load Memory

. 

Status Window 

Provides a visual record of the recent operator 
actions. 

Load or Restore Memory

This button toggles to load or restore the selected 
sensor’s information.

Load Memory

 displays when 288-connect is initially 

opened and after 

Save Memory

 is used. 

Revert Changes

 displays after 

Load Memory

 is 

pressed and restores the previously saved sensor 
information.

Save Memory

Press to write the sensor data to user-specified 
location. 

Load or Restore Complete Sensor Info From File 

Press and use the dialog box to load information from 
a previously saved sensor file. 

Save Complete Sensor Info To File

Press to save data from the sensor to a file. 

Figure 21. Sensor calibration tab.

SENSOR INFO TAB FIELDS

Figure 22. Sensor calibration/sensor info tab.

Sensor Number

This is the number laser etched on the sensor. This 
value cannot be edited.

Comments

This may be edited to any 20-character string. 

NOTE: If comments are edited, a red text box appears  
in the lower left corner of the displayed screen indicating  
a change.

AO Range

Adjust the concentration and temperature ranges of 
the analog outputs.

Содержание InVue CR288

































Отзывы:

Нет отзывов