entegra technologies Crossfire, Руководство пользователя, Страница: 22 / 30

MAINTENANCE
Caring for your tablet.
This section provides instructions and information for about how to keep your Crossfire in top working
condition.
Checking power cords and connectors.
Check AC and DC power cords and power connectors
periodically for damage. Replace the power cord immediately if
you find any damage.
Protecting the computer from damage.
• Your computer is designed to sustain a multiple-axis drop
to a non-yielding surface. Do not intentionally drop the
computer, because the cumulative effects of multiple drops
may damage the computer over time.
• Do not place heavy objects on the computer.
• Do not disassemble the computer.
• Keep the computer at least 5 inches (13 centimeters) away
from any electrical appliance that generates a strong
magnetic field, such as a motor, magnet, TV, refrigerator, or
large audio speakers.
Protecting the computer from overheating
The computer monitors its internal temperature. As the internal
temperature approaches the tolerable limits of heat-sensitive
components, system functions are automatically limited or
turned off to prevent damage.
To prevent the computer from overheating, do not leave it
running for long periods of time in direct sun or in areas where
the temperature is above 120
o F or 48 o C.
Storing the computer
You can store the computer in the Off state for about 30 days
with a fully charged battery installed. After this period, recharge
the battery or replace it with a charged battery.
If you intend to store the computer for more than 30 days,
remove the battery pack and keep it in a cool place.
Caring for the display
To clean the display screen, dampen a soft cotton cloth with water
and gently wipe the screen surface.
Protecting the display
The screen is made from a durable, tempered glass and can
withstand significant pressure. However, it’s best to try to not
place hard items directly against the display.
When to replace the pen or pen tip
With use, the pen tip may become worn and can scratch the
screen. If your pen exhibits one of the following problems, replace
the pen:
• The pen does not move freely across the screen.
• The pen does not perform as expected
Calibrating the digitizer
Calibrating the digitizer adjusts the cursor position on the screen
relative to the position of the pen tip or finger. Calibrate the
digitizer to adjust the distance error between where the pen or
finger is actually touching the screen and where the computer is
registering the pen or finger touch.
You may need to calibrate the digitizer in the following situations:
• You are using the computer for the first time.
• The previous user of the computer writes with the opposite
hand or at a different pen angle.
• The computer has not been used for some time.
• The computer has been serviced.
To see video tutorials click on the link on your desktop or visit
entegratec.com/support for additional video instructions.
Page 22 | Crossfire Pro User Manual | entegratec.com | help@entegratec.com