ML-
1 8 0
user manual
Entar Professional Limited
2
SAFETY INFORMATION
PROTECTION FROM ELECTRIC SHOCK
Warning!
This product is for professional use only. It is not for household or residential use.
This product presents risks of lethal or severe injury due to fire and heat, electric shock, and falls. Read
this manual before powering or installing the fixture, follow the safety precautions listed below and
observe all warnings in this manual and printed on the fixture. If you have any question about how to use
this fixture safely, please contact your Entar dealer.
Warning!
Always disconnect from mains supply before replacing the lamp.
Disconnect the fixture from AC power before removing or installing the fuse, or any part, and when not in
use.
Always ground (earth) the fixture electrically.
Use only a source of AC power that complies with local building and electrical codes and has both
overload and ground-fault protection.
Do not expose the fixture in rain and moisture.
Refer any service operation not described in this manual to a qualified technician.
Never operate the fixture with missing or damaged lenses and/or covers.
Do not stare directly into the light.
PROTECTION FROM BURNS AND FIRE
Never attempt to bypass the thermostatic switch or fuses. Always replace defective fuses with ones of
the specified type and rating.
Keep all combustible materials (for example fabric, wood, paper) at least 1 meter away from the fixture.
Keep flammable materials well away from the fixture.
Do not illuminate surfaces within 1 meters (3 feet) of the fixture.
Provide a minimum clearance of 0.1 meters around fans and air vents.
Never place filters or other materials over the lens.
