3
RAK93 / © Ensto 2018
Chago eFill Charging Point
Introduction
This installation instruction and user guide is for the eFill charging point product family, which is a
range of home charging points with a fixed cable solution. The eFill product family includes eight
versions.
EVH020.01R / EVH020.01R16 (Type1 plug) and EVH020.02R / EVH020.02R16 / EVH050.02R16 (Type2
plug) can be installed by a layman.
EVH020.01 (Type1 plug) and EVH020.02 / EVH050.02 (Type2 plug) must be installed by a qualified
person e.g. an electrician.
Even if the features and appearance of the different eFill versions varies, the installation and usage
of the product will always follow the principles described in this guide.
Installation Instructions
Installation
Delivery contains
•
eFill charging point
•
Plug holder
•
Installation accessories
•
Installation and Operation instruction
Items needed
•
Ratchet wrench set
•
Torx key set
•
Power drill with bore bit
•
Screws and possible accessories for wall installation
Before Installation
Remove the eFill from it’s package. Do not to scratch the surface of the eFill after removal from the
package.
Installation to Wall
When selecting the installation location, make sure that the wall material is suitable and robust. The
mounting surface should be flat and vertical (± 10°).
EVH020.01R / EVH020.01R16 and EVH020.02R / EVH020.02R16 / EVH050.02R16
See figure 1.
•
Make sure that the supply cable of 1,5 meters reaches the nearest outlet.
•
Remove the mounting plate from the charging point by undoing the bolt on top.
•
Place the mounting plate into the desired location on the wall.
•
Attach the charging point on the mounting plate and tighten the bolt you loosened in place.
At the bottom of the wall bracket lies a small hole for padlock for extra security against theft
of the charging point.
•
Install the plug holder in a suitable location near the charging point. See “Plug Holder Installa-
tion” and figure 5 on page 8.