Ensemble Designs BrightEye 90-A, Руководство пользователя

Страница: 22 / 41

BrightEye 90-A HD Up/Down/Cross Converter and ARC with Analog Audio
BrightEye 90-A - Page 22
Aud Input
The appearance of this menu will depend on the mode selected and the type of
audio used.
Multiplexer Mode
When the module is set for Mux 8 , the Input menu provides the controls
shown below:
• Group A Status – the status of the audio selected in
Group A Select will be displayed as No Audio Present ,
Group 1 OK , Group 2 OK , Group 3 OK , or Group 4 OK.
• Group B Status – the status of the audio selected in
Group B Select will be displayed as Off , No Audio Present ,
Group 1 OK
,
Group 2 OK
,
Group 3 OK
, or
Group 4 OK.
• Group A Select – select the audio group to multiplex from Group 1 ,
Group 2 , Group 3 , Group 4 .
• Group B Select – select the audio group to multiplex from Group 1 ,
Group 2 , Group 3 , Group 4 , or Off .
When the module is set for Mux 4 , the Input menu provides the controls
shown below:
• Group A Status – the status of the audio selected in
Group A Select will be displayed as No Audio Present ,
Group 1 OK , Group 2 OK , Group 3 OK , or Group 4 OK.
• Group A Select – select the audio group to multiplex from Group 1 ,
Group 2 , Group 3 , Group 4 .
Demultiplexer Mode
When the module is set for
Demux
, the Input menu provides the controls
shown below.
• Group A Status – the status of the audio selected in
Group A Select
will be displayed as
No Audio Present
,
Group 1 OK
,
Group 2 OK
,
Group 3 OK
, or
Group 4 OK.
• Group B Status – the status of the audio selected in
Group B Select
will be displayed as
Off
,
No Audio Present
,
Group 1 OK , Group 2 OK , Group 3 OK , or Group 4 OK.
• Group A Select
– select the audio group to demultiplex from
Group 1
,
Group 2
,
Group 3
,
Group 4
.
• Group B Select
– select the audio group to demultiplex from
Group 1
,
Group 2
,
Group 3
,
Group 4
, or
Off
.
See Audio Input diagram on next page
NOTE
: