www.ensembledesigns.com
BrightEye 72 - Page 15
3G/HD/SD SDI to HDMI Converter User Guide
TM
BrightEye 72
Example of on-screen display while adjusting the Bright control from the front panel
Examples of Using the Front Panel in Conjunction with On-Screen Display
Example 1
The image below is showing the
Bright
control. This example shows what you would see if you
pressed the
Mode
button on the front panel until the
Bright
LED started blinking. The Bright control
is indicated in the blue box. To the right of that is the specific parameter setting that you can adjust.
Pressing the
Left Arrow
decreases the value while pressing the
Right Arrow
increases the value.
Notice also that the input status is displaying in the upper left area of the monitor image, indicating
input format, frequency, and the presence of embedded audio. This example also includes graticule
lines and audio meters.
Blue Offset and Gain controls from the front panel, you must turn on
Include in OSD
.
NOTE:
There are no LEDs on the front panel to blink to indicate that any of these six Color
Correction controls are selected, but the on-screen display will show each of these controls as you
move through them by pressing the
Mode
button on the front panel.
