www.ensembledesigns.com
BrightEye 72 - Page 14
3G/HD/SD SDI to HDMI Converter User Guide
TM
BrightEye 72
The VU LED indicates the output audio level of the sum of channels 1 and 2. The LED will be
green when the audio level is at or below the digital reference level. The LED lights yellow
when the audio level is between the digital reference level and the peak threshold. The LED
lights red when the peak threshold is reached. Note that the digital reference level (sometimes
referred to as 0 VU) may be set by the user to -20 dBFS or -18 dBFS. Similarly, the user may set
the peak headroom between -2 dBFS and -10 dBFS. These two parameters are adjustable using
the BrightEye PC or Mac Control application.
Pwr (Power)
•
– Illuminates green when the BrightEye unit has power and the internal voltage
regulator is functioning correctly.
Adjusting Parameters from the Front Panel
From the front panel, use the
Mode
,
Left Arrow
, and
Right Arrow
buttons to select and adjust
parameters.
Pressing the
Mode
button cycles through the parameters that can be modified from the front panel.
The LED of the currently selected parameter will blink. A quick press of the
Mode
button advances to
the next editable parameter. A longer press of the
Mode
button will back up to the previous editable
parameter.
Pressing the
Right Arrow
or
Left Arrow
advances or backs up through the choices for the currently
selected parameter, or increases (
Right Arrow
) or decreases (
Left Arrow
) the value of the selected
parameter.
Pressing the
Right Arrow
and
Left Arrow
simultaneously restores the selected parameter to its
default value.
Front Panel Control and On-Screen Display
By default, on-screen display is enabled. There are two controls in the BrightEye PC or Mac Control
application that enable aspects of the on-screen display.
The first control is the
1.
OSD Enable
drop-down control in the
Config
menu in the BrightEye PC or
Mac Control application. The available selections for this control are the following:
Off
•
– Turns off the on-screen display.
Input Status
•
– Displays the input status only. Input status is shown near the upper left
corner of the monitor. Input status shows the input format, frequency, and embedded
audio presence in terms of group 1 (G1), group 2 (G2), group 3 (G3) and group 4 (G4).
Control Adjust
•
– Displays the value of the currently selected front panel control at the
lower center portion of the monitor. For example, when the Bright control is selected on
the front panel, the on-screen display (on the HDMI output) might read “Bright 100 pcnt”
indicating it is set to 100%.
All
•
– (Default selection) Displays both the input status and the current control value.
The second control relating to on-screen display is
2.
Include in OSD
in the
Color Correct
menu in
the BrightEye PC or Mac Control application. If you want to be able to adjust the Red, Green and
