www.ensembledesigns.com
Page 5
Model 5030/5035 System Control Module
User Guide
Installation
1RU Frame
The 5035 System Control module installs in a dedicated slot in the upper right of the 1RU frame.
3RU Frame
The 5030 System Control module installs in a dedicated slot to the right of the ten video and audio
modules in the 3RU frame.
Cabling (3RU Frame Only)
If you have a Touch Screen option installed, connect the ribbon control cable from the 5030 System
Control module to connector J3 on the front door.
Front Panel Controls and Indicators
The status indicators and controls on the front edge of the 5030/5035 System Control modules are
illustrated below.
The Status menu display is used for various purposes. It acts continuously as a status indicator for
showing system communication between the Avenue frame and external Ethernet, Serial, and
External Reference connections.
A series of menu functions can also be accessed through the Status menu as listed below:
•
Display current software version running on this Control Module
•
View and change AveNet and IP Addresses
•
Reset the Touch Screen Panel calibration to factory default. (Note this can also be done from
the Touch Screen panel.)
•
Enable AVIP function and set lower and upper AveNet addresses in frame group