Page 3 of 34
EN109-1631750-48 IFU
1
Introduction
Foreword
This manual has been written for the owners and operators of the Sonopuls 190. It contains general
instructions on operation, precautionary practices, maintenance and parts information. In order to
maximize the use, efficiency and lifespan of your unit, please read this manual thoroughly and become
familiar with the controls as well as the accessories before operating the unit.
For detailed explanation on installation and operation of the Sonopuls 1
90 with StatUS™ Pack 100 (for
static ultrasound), we refer you to the operating instructions StatUS™ Pack 100 (art.nr.
1629.750). This
guide (CD-
ROM) can be found in the packaging of the StatUS™ Pack 100.
Specifications put forth in this manual were in effect at the time of publication. However, owing to
Enraf-
Nonius BV’s policy of continual improvement, changes to these specifications may be made at
any time without obligation on the part of Enraf-Nonius BV.
It is important to read the following instructions carefully before using this device
properly and safely. The manufacturer cannot be held responsible for the results of using
this device for any purposes other than described in these operating instructions.
Device Description
The Sonopuls 190 is a multi-frequency ultrasound unit. The multi-frequency ultrasound applicators for
the 100-serie provide both 1 and 3 MHz operation. The applicators can be used with both, large and
small treatment surfaces and are suitable for subaqual treatments.
Contact control suspends the application of ultrasonic energy when acoustical contact with the
treatment area becomes insufficient.
The user can connect two ultrasound applicators. These can be activated from the ultrasound menu.
