Page 11 of 20
EN109-1570750-41 IFU
The head section and arm rests are not suitable to sit on, but only to support the head and
arms.
When adjusting table top sections, avoid getting body parts between hinged parts.
Make sure that you and persons near or on the couch keep a sufficient distance from these
hinged parts.
The bottom clearance of the couch is 95 mm. It is therefore possible to place a lifting device or
emitter under the couch with a base that is not higher than 95mm. Make sure not to make
contact with the motor when placing the lift or emitter. Placing objects under the couch with a
height exceeding 95 mm may result in dangerous situations and serious damage.
Try to limit the continuous use of the motors. For every 2 minutes that the couch is operated in
succession, it should not be used for 18 minutes in order to cool down completely. If the
engine is used significantly more than this, it falls outside the normal use of the motor, and the
performance of the motor will decrease.
The treatment surfaces of the couch are not anti-static.
Use a clean couch cover/towel/terry cloth cover/paper cover for each patient. This will
guarantee the hygienic conditions.
